Showing 1–16 of 20 results

3cVape Conspiracy RDA

The 3cvape x Squirmingcoils Conspiracy RDA is a 24mm, two post build deck rebuildable atomizer that is different because it must be user assembled. Assembly instructions are included in the package and must be assembled accordingly. Be sure both insulators are installed correctly to prevent possible damage or physical harm. The two post, silver plated build deck has top mounted terminals with two terminals per post that measure at 3mm by 1.5mm each and side mounted hex screws are used to secure coil leads of either dual or single coil builds. Airflow enters the Conspiracy 24mm RDA via dual adjustable side airflow, measuring at 10mm by 2mm each airslot, and has single and dual coil airflow ability. A 6mm bore 810 ULTEM drip tip is used to take in vapor production and a bottom feed pin is included that can change the RDA into a bottom feeding atomizer. 3cvape x Squirmingcoils Conspiracy 24mm RDA is a beautifully crafted and visually appealing atomizer in today’s market.

528 Customs GOON 25mm RDA

The 528 Customs GOON 25mm RDA is the updated rendition of the pioneer rebuildable dripper, implementing a spacious two-post build deck with clamp-style connection system, and a triple slotted dual airflow system. The GOON 25mm integrates a user-friendly two-post build deck properly top-secured via clamp-style fastening system. The clamp style connection can be used to fasten down even the largest of coil leads to create the best connection possible. A top cap with airflow ring provides precision airflow adjustments on the GOON 25 RDA. save the exact airflow settings. This airflow consists of two groups of three holes to inlet the preferred amount of airflow. The top cap and drip tip can be removed by unscrewing the top for precision dripping, without changing the airflow settings.

Augvape Intake RTA

Augvape introduces their Intake RTA, a 24mm rebuildable tank atomizer with a quarter turn threaded top cap with top fill capability, exposing two large fill ports, allowing the RTA to hold up to 4.2ml of your favorite E-Liquid. The Intake is also capable of holding 4.2ml of E-Liquid with the bubble glass tank section, and 2.5ml for the standard tank capacity. The build deck on Augvape’s Intake is a two post build deck that must be removed from the base of the RTA. There are two terminals total, with each measuring at 3mm, corner wicking cutouts, and PEEK insulation. Airflow enters the Intake via dual adjustable top airslots, measuring at 10mm by 3mm each and can be fully closed. A 8mm wide bore delrin drip tip allows the user to intake ample vapor, however, a 510 drip tip adapter is included for more versatility. Augvape’s Intake RTA is a simplistic RTA that is perfect for those looking for an RTA that can be used as a regular or shorty sized rebuildable tank atomizer.

B2K RDA BY BB Vape

The B2K RSA (Rebuildable Squonk Atomizer) is the new flavour chasing, bottom-feeding atomizer in town! Fully equipped with multiple caps and a bottom feeding option to keep you satisfied all day!

Features a 23mm diameter deck and uses an easy to use single coil notch style deck with ample space for large coils. The deck is constructed using stainless steel with large slanted airflow slots on either side. The airflow can be reduced by simply rotating the cap. The deck also features a milled juice well to allow more juice to absorb into the wick and space for the cotton when squonking or dripping.

Digiflavor Drop Solo RDA

The Digiflavor Drop Solo RDA is a 22mm diameter RDA designed by Brian from The Vapor Chronicles YouTube channel. Its biggest advantage is that it provides many parts for DIY, which allows you to smoke in your favorite way. The Drop Solo RDA features 2 large post holes allowing for easy coil placement, and maximum build space with open access to trim excess. The post holes have also been designed with a notch to trap round wire builds with ease. And the horizontal side airflow control with 6 air holes that can adjust the airflow you want, while maintaining an ultra smooth, flavorful and whistle free experience. The including two kinds of different caps for you to choose, the stainless cap provides more space and increased airflow, while the transparent cap will satisfy those who want a lower profile and reduced chamber benefits. Besides the Standard 510 pin, the package also contains a raised BF squonk 510 pin and gold plated 510 connections that allow juice to fill both sides of the well at the same time. All of these replacement parts make it be a very funny RDA which fit for those who enjoy DIY. 3 colors are available.

Drop Dead RDA by Hellvape

The HellVape DROP DEAD RDA is an epic collaboration with Vapin’ Heathen and The Vapor Chronicles to create a rebuildable masterpiece based on the designs of the Dead Rabbit and DROP RDA. The DROP DEAD RDA is constructed with durable Stainless Steel with high-level design elements HellVape have come to known from, with the new iconic logo etched onto the wall sleeve.

Entheon RDA

Vaping and More present the highly anticipated and patiently awaited Entheon RDA! In addition to the superb flavour, the Entheon is one of the easiest RDA’s to build on with an innovative two post deck & innovative Reversible Coil Clamping System (CCS). Built specifically for single coil resistance wire builds, the Entheon RDA will allow any builder whether they are a novice or expert to install their coil with ease. For users, a bottom feed pin is included as standard.

Goon LP NEW build deck

The GOON LP RDA by 528 Customs is the modern redesign of the critically acclaimed GOON RDA, shortening the form factor for a low profile structure while implementing a unique static bridge-post with clamp mechanism for tremendous capabilities.

Goon V1.5 RDA

Updated version of the Goon 24mm RDA with an improved bridge clamp design, extra build space, cyclops airflow and domed top cap.  The Goon V1.5 RDA – 528 Custom Vapes is the updated version of 2016’s best selling Goon 24mm RDA.  The V1.5 includes an improved bridge clamp design, extra build space, new cyclops style airflow and a domed interior top cap for increased flavour.  Available in Black, Gold, Rose Gold and Stainless Steel, the V1.5 also includes a BF Squonk making it fully squonk compatible.

Hellvape Aequitas RDA

Hellvape introduces the Aequitas 24mm RDA, designed by AmbitionZ VapeR; a 24mm, top terminal, gold plated postless raised build deck and a 3mm deep juice well. The Aequitas RDA is capable of running both single and dual coil options and each terminal has side mounted hex flathead screws, which are both included. Airflow enters the Aequitas RDA via flippable barrel for either a top side diagonal airflow or a bottom side diagonal airflow. Included with the RDA are a 10mm wide bore 810 Delrin drip tip and a 510 drip tip adapter for various drip tip styles and use. The Aequitas RDA also includes a gold plated bottom feed pin to convert your RDA into a bottom feeding rebuildable atomizer. With its unique flippable barrel for airflow preference and convenient to build on build deck, the Hellvape Aequitas 24mm RDA is a stylish, high-functioning rebuildable atomizer at an affordable price!

Kali RDA by QP Designs

Another masterpiece created by QP Designs, a great flavour chasing RDA that’s also compatible with squonk mods! It features a dual or single coil postless build deck for all sorts of big and small builds!

KRMA RDA By Mission

The KRMA 22mm BF RDA by Mission XV is a single coil bottom fed RDA with dual airflow and comes with both black and stainless steel caps for user convenience. The build deck of the KRMA has a lead trap on one side and an open-sided terminal on the other for a simplified building experience. Each terminal is 4mm by 1.5mm and is each held down with a flathead grub screw. The KRMA comes with two colored top caps, one black delrin and one stainless steel. Each top cap has a 4mm by 1.5mm air port on each side that is directly positioned to move air directly through the coil. This RDA features a 6mm bore 510 drip tip; one for each top cap. The KRMA has a 5mm deep juice well and can push juice through the squonk pin in the middle of the device. The stainless steel squonk port has a toggle screw that is housed within the base of the device. The screw can be removed from the base of the device and into the squonk pin in order to accommodate for top-feed use. The KRMA is an excellent 22mm RDA with an easy building experience for both beginners and experienced users alike.

Limited Edition Titanium Hadaly RDA By Psyclone Mods

Psyclone Mods follows up to the critically acclaimed and near universally praised Hadaly RDA and reinvents it with a nearly full Titanium construction. The Hadaly Ti 22mm RDA is an extremely limited edition RDA with only 1500 made. The Hadalty Ti maintains the same diameter to 22mm while expanding a highly effective and innovative dual clamp style build deck. The Hadaly Ti’s build deck deploys a new coil clamping system (CCS) and are constructed with gold plated titanium clamps which in turn, makes building effortless. Each terminal features a 5mm maximum size, providing more than ample coil lead capacity. The juice and wicking capacity is also enormous, measuring 7mm deep, working optimally with the bottom feed pin that can be interchanged form the regular 510 pin. Four airflow slots are positioned to deliver airflow properly to the underside of the coil. Each Hadaly Ti comes serialized, serialization is located on the bottom of the RDA. A remake of the extremely popular Hadaly designed to match the incredible flavor while extending the ceiling of vapor production, Psyclone Mods’ Hadaly Ti RDA is sure to set another benchmark in quality rebuildable dripping atomizer systems.

Reload BF RDA

Reload Vapor USA Newest Cerakote BF RDA Cap & Drip-Tip Sets, These caps Will Also Fit The Reload RDA V1.5

Available In:

  • Black
  • Red
  • Purple
  • Tiffany Blue

Includes Cap, Drip-tip & Spare O-ring Set

Reload X RDA

The Reload X RDA is equipped with all new top-down bottom airflow system to minimize the Leakage while still able to provide intense flavor. Like all Reload Attys, the build deck is user friendly. And the look is just an extra.

Vicious ant Radius V2

The Radius V2 is a dripper made by Vicious Ant, it is a RDA 22mm provided with a single coil worktable. It also comes with pin bottom feeder.